Covered by CBAM
Commodity code 7220 and UK CBAM
Flat-rolled products of stainless steel, of a width of less than 600 mm.
10 codes under heading 7220 are covered by the UK carbon border tax (CBAM), in the iron and steel sector. Every code under 7220 is covered. HMRC's default values run from 5.508 to 6.746 tCO2e per tonne, so roughly £53.37 to £65.37 tax per tonne, at HMRC's illustrative rate of £9.69 per tCO2e.
| Code | Description | Default value (tCO2e per tonne) | Tax per tonne |
|---|---|---|---|
| 7220 11 00 | Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than hot-rolled, of a thickness of greater than or equal to 4,75mm | 5.508 | £53.37 |
| 7220 12 00 | Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than hot-rolled, of a thickness of less than 4,75mm | 5.698 | £55.21 |
| 7220 20 21 | Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than or equal to 3mm and containing by weight greater than or equal to 2.5% nickel | 6.006 | £58.20 |
| 7220 20 29 | Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than or equal to 3mm and containing by weight less than 2.5% nickel | 5.581 | £54.08 |
| 7220 20 41 | Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than 0.35mm but less than 3mm, and containing by weight greater than or equal to 2.5% nickel | 5.614 | £54.40 |
| 7220 20 49 | Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than 0.35mm but less than 3mm, and containing by weight less than 2.5% nickel | 5.842 | £56.61 |
| 7220 20 81 | Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of less than or equal to 0.35mm and containing by weight greater than or equal to 2.5% nickel | 6.075 | £58.87 |
| 7220 20 89 | Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of less than or equal to 0.35mm and containing by weight less than 2.5% nickel | 5.844 | £56.63 |
| 7220 90 20 | Flat-rolled products of stainless steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced” and further worked, perforated | 6.118 | £59.28 |
| 7220 90 80 | Flat-rolled products of stainless steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced” and further worked, non-perforated | 6.746 | £65.37 |
Check all your imports at once
Load your import entries into the free checker to see whether you pass £50,000, when to register and roughly what you'll pay. Your file stays on your computer.