Covered by CBAM
Commodity code 7214 and UK CBAM
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling.
12 codes under heading 7214 are covered by the UK carbon border tax (CBAM), in the iron and steel sector. Every code under 7214 is covered. HMRC's default values run from 2.518 to 3.867 tCO2e per tonne, so roughly £24.40 to £37.47 tax per tonne, at HMRC's illustrative rate of £9.69 per tCO2e.
| Code | Description | Default value (tCO2e per tonne) | Tax per tonne |
|---|---|---|---|
| 7214 10 00 | Bars and rods, of iron or non-alloy steel, not further worked than forged (excluding in irregularly wound coils) | 3.682 | £35.68 |
| 7214 20 00 | Bars and rods, of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process | 3.040 | £29.46 |
| 7214 30 00 | Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excluding containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) | 2.518 | £24.40 |
| 7214 91 10 | Bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight less than 0.25% of carbon, of rectangular “other than square” cross-section (excluding those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) | 2.545 | £24.66 |
| 7214 91 90 | Other bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight greater than or equal to 0.25% of carbon, of rectangular “other than square” cross-section (excluding those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) | 2.541 | £24.62 |
| 7214 99 10 | Bars and rods of the type used for concrete reinforcement, smooth, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing less than 0.25% of carbon, of square cross-section or of a cross-section other than rectangular | 2.562 | £24.83 |
| 7214 99 31 | Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing less than 0.25% of carbon, of circular cross-section, of a maximum diameter of greater than or equal to 80mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) | 3.521 | £34.12 |
| 7214 99 39 | Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing less than 0.25% of carbon, of circular cross-section of a maximum diameter of less than 80mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) | 2.581 | £25.01 |
| 7214 99 50 | Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight less than 0.25% of carbon, of square cross-section or of a cross-section other than square or circular (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) | 2.538 | £24.59 |
| 7214 99 71 | Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight greater than or equal to 0.25% carbon, of circular cross-section measuring greater than or equal to 80mm in diameter (excluding bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel) | 3.546 | £34.36 |
| 7214 99 79 | Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight greater than or equal to 0.25% carbon, of circular cross-section measuring less than 80mm in diameter (excluding bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel) | 3.422 | £33.16 |
| 7214 99 95 | Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight greater than or equal to 0.25% carbon, of square or of other than rectangular or circular cross-section (excluding indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel) | 3.867 | £37.47 |
Check all your imports at once
Load your import entries into the free checker to see whether you pass £50,000, when to register and roughly what you'll pay. Your file stays on your computer.